Description
- Carbon Remover is a powerful gel that dissolves carbon build-up from metal surfaces, brick and glass. SCR works quickly and easily saving time and labour. SAFE ON ALUMINUMREMOVES BAKED ON CARBOM FROM:Oven Cooker
Cooking Pots and Dishes Frying Pan
Oven sheets Chinese Woks
All metal surface Deep Fryers
Stainless Steel Waffles Bakers
Nickel Steel Popcorn Kettles
Brass Brick
Glass Barbecue Grill
Fireplace Door Glass Roasting & Sheet Pans
-
- DIRECTION
Shake well before using
Spray generously, holding can 8 to 10 inches from surface
Leave for 15 minutes or as long as 5 hours, depending of the thickness of the carbon build-up.
Leave over night if convenient.
Test with small wooden stick to see if carbon is completely loose. DO NOT SCRUB!
When carbon completely loose, wash under cold water.
Before using appliance be sure to wash thoroughly with warm water and soapNote:-1) If the build up is really thick, we recommend using Carbon-Off (above) to clean the oven the first time, and you may use Foam Plus (below) for each cleaning thereafter.2) Carbon-Off is to be used on a cold oven (room temperature). Foam Plus is used in a warm oven (approx. 200-220 degrees F.)
3) The Carbon-Off (once sprayed on) needs to remain on the oven walls until surface wipes clean. This could take from 15 minutes to several hours (depending on the thickness of the build-up), whereas the Foam Plus sprays on and you wipe off almost immediately waiting only 15-30 seconds.
- DIRECTION
