Asmaco Instant Grab Underwater Wet and Dry Adhesive & Sealant 280ml

£8.99

Description

Wet, underwater and dry instant Adhesive.

ASMACO INSTANT GRAB is an easy-to-use for dry, wet and underwater, for high strength, elastomeric product which can serve as both adhesive and sealant. It is a waterproof glue that instantly bonds, seals and repairs virtually everything. This adhesive’s instant grab capability holds objects in place and, in most cases, eliminates the need for fixtures. It cures in 24-48 hours and reaches maximum strength in 7 days. No need for screws or nails, it’s perfect for all types of bonding, sealing and repairs. The special high performance I-Tech Sealant formulation provides excellent underwater bonding and sealing capability and Asmaco Instant Grab can be used to seal water leakages without draining.

KEY PERFORMANCE PROPERTIES:
Easy to use
Can be used on dry or wet surfaces
Can be applied underwater
Strong instant grab adhesive that locks into place and holds on tight.
Paintable
Permanently flexible
Non sag
Can be applied to overhead surfaces
VOC compliant
Excellent resistance to chemicals micro organisms
UV and weathering resistant
Low odour adhesive

MAIN APPLICATIONS:
ASMACO Instant Grab Adhesive is a DIY product that can be used also in many forms of construction & Building including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily trafficked areas. It bonds well under water and has excellent grab on porous substrates. It can also be used in industries such as signage, marine, shop fitters
Page 2 of 3
etc. Asmaco Instant Grab is best suited for applications viz. household trim and molding, tile bonding and sealing, underwater bonding, underwater sealing and repair, bonding landscape blocks, paneling installation, sealing showers / pipes and baths, countertops & cabinets installation and repairs, bonding back splash to walls, window & door installation and sealing, masonry Sealing, installing wall stone, pool tile fixing and repairs, home exterior fixing and repairs, gutter sealing, roofing applications and repairs, HVAC sealing and repairs, marine & automotive applications and repairs, DIY projects, emergency adhesive and sealant repairs Recommended surfaces: Metals, Wood, Foam, Rubber, Tile, Ceramic, Marble, Porcelain, Glass, Granite, Brick, Concrete, Stucco, Plaster, Stone, Masonry, dry wall, Fiberglass, Some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs etc. Typical

USAGE INSTRUCTIONS:
The joint surfaces must be clean, dry and free from all contamination. The surfaces should be de-greased using the appropriate solvent. Cut off tip of the cartridge, leaving thread intact. Screw on the nozzle and cut nozzle to the required size. Insert cartridge into a standard size caulking gun and squeeze trigger. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take place. In some applications, clamping may be required. If needed, the bonded objects can be repositioned within 10 minutes of application. Allow 24-48 hours for curing. Will reach maximum strength in 7 days

Additional information

Weight 250 g