1 White and off Whites Gel Coat Repair Kit - match all white and off white colours. ( match white cream and light grey)
 |
White Gel Coat
REPAIR KIT
RAYPLEX makes
Gel Coat Repair and Color Matching Easy, From Cream to Light Grey.
Used to Repair Fibreglass
Bath
Shower Stalls
Hot Tubs
Boats
Recreational Vehicles
|
Place chart on gel coat to be matched. next start adding a few drops of pigment. Check mix and repeat until desired colour is achieved.
Just add between 1 and 50 Drops.
These pigments change the color very gradually. This gives you very accurate control.
Matching Tips:
Over the years we have found that most off-white colors start with a base of OXIDE and then have a slight amount of yellow or brown or black added. That covers about 740 different shades of off white.
As gel coat get older it fades. Its not unusual to find a 10 year old boat that has faded to 5 different colors. (RE: deck, transom, interior, port side, and starboard side.) Different amount of sunlight caused the fading to happen.
The kit contains:
250ml Gelcoat, Catalyst (hardener), 4 Pigments (Reddish Brown, Carbon Black, Iron Oxide Yellow, Chrome Yellow), 2 Pair Latex Gloves, 2 Mixing sticks, 2 Paper mixing cups, Colour Chart, and Instruction sheet
£42.99
2 Pro DIY Gelcoat repair kit
|
Repair chips, cracks and small holes in fiberglass and Acrylic showers, baths and boats.
You can permanently repair nicks, gouges and scratches in Fiberglass and Acrylic Baths Boats, Hulls and Decks. With a glass hard cured shinny finish. And match any colour with colour match guild included.
With our kit you will now have everything you will require to complete your repair just like a professional.
|
£30.99
Features:
Blend colouring agents to achieve a match to almost any colour
Repair material cures glass-hard in one hour
A special mold release agent added and no-run polyester gel makes a slick , no-sand finish quick and easy
No more applying plastic films hoping that your repair will cure. Our curing additive is mixed in the paste so every application dries through to a hard sand able ready finish.
Mix colours directly against hull deck or bath for a perfect match
Also repairs countertops, appliances, bathroom tubs, baths and sinks
We make repairing your gelcoat easier without having to use those non reusable plastic sheets
We have already added the mold release agent to the product, to ensure a hard cured shinny finish.
Our Custom Kits contains
Clear Repair Paste - 3oz fl.oz
One (.50) Fl oz. liquid hardener
Six (.50) Fl oz. Tubes of all primary colors white, black, red, blue ,brown and yellow
1 reusable mixing cups & 1 pair of latex gloves
2 Cleaning solvents
1 Spreader applicator ,
1 reuseable 3M sand paper and 3 stir sticks
Full Instructions and step by step colour matching formula
3 Neutral Gel Coat - (Colour - Clear ) - match other colours
|
Neutral Gel Coat - (Colour Clear)
Repairs chips, deep scratches, dock dings, pinholes and gouges in fiberglass gel coat. Formulated with gel coat resins that are used in the production of boats or fiberglass products. Non-sag formulation with resiliency and toughness. Use to repair baths, boats, marinas, snow mobiles, RVs, sail and paddle boats, sailboards, swimming pools, showers, tubs, sinks, etc. Catalyst included. Gelcoat is compatible with Rayplex Colour Paste.
To match other colours just add the colour paste
Size: 250ml
|
£17.99
Colour Matching Guide
For example to get cream start with white and add a touch of brown and yellow to lighten. For colour grey take white and add a touch of black..
You can use the clear or white adhesive to start the colour matching with the paste.
Colour Pigment Colourant for Gel Coat - to match other colours
|
Colour Pigment Colourant for Gel coat - (Colour Clear)
These pigments are pastes for tinting gel coat, polyester, vinyl ester and polyurethane foam. Our primary colours can be blended to any shade or hue. Keep an assortment of pigments on hand for colour matching repairs or blending your own custom colour. Stir or shake colour pigment well before using. Use small amounts of colourant to tint base. Mix thoroughly after each addition. Add or mix colourant to one quart resin/gelcoat. Test on a piece of scrap material before continuing project. ALWAYS MIX COLOUR PIGMENT WITH RESIN/GELCOAT BEFORE ADDING HARDENER OR CURING AGENT. Maximum mixing percentage for this colour is 12%.
Size: 125ml
Current colours:- Red, Green and Blue
|
£7.99
