Insta-Seal Permanent Block & Radiator Seal HG9048s
£6.50
(Pt.#HG9048S-11OZ) is rated by repair shops as the #1 SELLER currently on the Automotive Market today.....
INSTA-SEAL mixes with all antifreeze-no need to drain cooling system before use & simply follow instructions.
SEALS LEAKS IN ENGINE BLOCKS, CYLINDER HEADS, HEAD GASKETS, RADIATORS, FREEZE PLUGS and HEATER CORES.
Insta-Seal Permanent Block Radiator Seal is compatible with all types of glycol-based coolants an antifreeze.
Formulated with ceramic micro-fibers and copper fines of varying size to insure a fast, permanent seal of all holes or cracks in the cooling system. The ceramic micro-fibers and copper fines flow into cracks that are too small to be seen by the human eye to provide a permanent seal. The micro size ceramic fibers and copper fill the entire crack from top to bottom to form a complete "weld" within large and small cracks.
The copper fines also conduct heat across the crack or hole, eliminating hot spots that normally form around the edges of a hole or crack.
Expands and contracts with temperature changes and is designed to be used in all types of metal engines and radiators - such as cast iron, steel, aluminum, copper, and brass - and radiators with plastic tanks.
Directions:-
1 Shake bottle and add to radiator or overflow tank.
2 Leak will stop within 1 to 3 minutes after engine reaches operation temperature.
3 Leave INSTA-SEAL in engine for future sealing.
Other Products
Leaks No More | (15 fl oz / 444 mL) HG2235s
 |
- Restores elasticity and returns seals and gaskets to original size to stop leaks.
- Stops oil leakage through valve cover gaskets, oil pans, timing chains, and front and rear crankcase bearings.
- Stops leaks through seals and gaskets of manual transmissions.
- Can be used to stop leaks in industrial gear boxes.
- Compatible with all oils - industrial, motor, mineral, synthetic, and diesel.
- Stops leaks in 500 km or 300 miles.
Leaks No More is formulated to clean the varnish, gum, wear particles, and sediment from the face of the seal. Leaks No More also contains special chemicals that are absorbed by the seals and gaskets restoring their suppleness. If Leaks No More is used every six months, the seals' and gaskets' suppleness is maintained and oil leaks are prevented.
|
|
£6.50
|
|
Smoke No More Oil Treatment | (15 fl oz / 444 mL) HG2251s
 |
- Smoke No More is a highly concentrated oil stabilizer for high mileage engines.
- Increases engine life by reducing oil consumption and engine wear.
- Smoke No More reduces engine noise, increases compression, maintains oil viscosity, and does not smoke when burned.
- Compatible with all engine oils, including synthetic and diesel.
- Ideal for all gasoline and diesel engines.
|
| £6.50 |
|
Trans plus with SMT Stop Leak - To Stop Automatic Gear Box Leakages 15 fl.oz. (444ml)

|
Completely revitalizes and hermetically tunes the automatic transmission.
•Eliminates leakage.
•Restores smooth shifting.
•Reduces noise, heating, wear, and vibration.
•Extends the service life of the transmission.
•Cleans the plates of varnish and gum.
•Restores elasticity and dimension to the valves and seals.
•Protects rubber and neoprene seals from drying and cracking.
•Compatible with all automatic transmission fluids and additives.
•Will not void manufacturer's warranty.
SMT2 significantly reduces unwanted friction and greatly enhances the cleaning properties of TRANS PLUS. SMT2 restores smooth shifting, reduces noise and wear, helps eliminate heat, and keeps the transmission fluid from oxidizing.
|
| 6.99 |
|
SMT2 Power Steering Conditioner and Stop Leak

|
SMT2 Synthetik™-Blend Power Steering Conditioner and Stop Leak completely stops leaks while it revitalizes and hermetically tunes the power steering. SMT2 treats the metal and lowers friction within the power steering up to 650%. The reduced friction lowers the operating temperature of the power steering pump as much as 20%. The combination of lower friction and operating temperature extends the life of the power steering pump up to 221%.
- Reduces noise, heat, wear, and vibration
- Restores smooth steering
- Reduces friction up to 650%
- Extends the service life of the power steering
- Stops leaks fast
- Protects rubber and neoprene seals from drying and cracking
- Compatible with all power steering fluids and additives
- Will not void manufacturer's warranty
|
| 6.99 |
|
SMT2 Synthetik™-Blend Fuel Injector Cleaner

|
|
SMT3565s
|

|

|
SMT2 is the only synthetic metal treatment in the world and the only metal treatment that can be used in fuels to reduce friction and extend the life of the fuel pump and the injectors. SMT2 treats the ferrous components of the fuel pump and precision plungers of the injectors while the new generation synthetic-blend, non-flammable cleaners clean the entire fuel system, including the intake valves and combustion chamber.
- Impedes injector fouling
- Impedes the formation of deposits and varnish on the intake valves and within the combustion chamber
- Dissolves and removes all pollutants from the fuel system
- Restores smooth idling
- Increases engine power and performance
- Maximizes fuel economy
- Reduces exhaust toxicity - CO, Nox, and CH
- Helps to pass annual exhaust inspection
- Improves acceleration
- Improves starting
- Safe for catalytic converters, oxygen sensors, and turbocharged engines
|
|
|
£5.99
|
|
SMT2 Synthetik™-Blend Complete Fuel System and Intake Valve Cleaner

|
|
SMT3572s
|

|

|
SMT2 is the only synthetic metal treatment in the world and the only metal treatment that can be used in fuels to reduce friction and extend the life of the entire fuel system and intake valves. SMT2 treats the ferrous components of the entire fuel system while the new generation synthetic-blend, non-flammable cleaners clean the carburetor, fuel injectors, intake valves, ports, manifold, and PCV valve.
- Maximizes power and performance
- Improves fuel economy
- Restores smooth idle
- Eliminates stalling
- Impedes the formation of deposits and varnish on the intake valves and within the combustion chamber
- Dissolves and removes all pollutants from the fuel system
- Reduces exhaust toxicity - CO, Nox, and CH
- Helps to pass annual exhaust inspection
- Improves acceleration
- Improves starting
- Safe for catalytic converters, oxygen sensors, and turbocharged engines
|
|
£6.99
|
|
One Tank Emission Pass formula 444ml

|
|
HG3272e
|

|

|
One Tank Emission pass Formula is specially formulated to be an easy, one step emission pass. While making it possible to pass emission, it also effectively increase acceleration and improves fuel economy.
- Reduces emission and the need for expensive high octane fuel
- Clean deposit within intake valves, fuel injectors and combustion chamber
- Improves acceleration and horsepower
- Restores fuel system to "like new" condition
Compatible with all fuel. Size 444ml
|
|
|
£6.99
|
|
Hi-Gear Premium Diesel Fuel Injector Cleaner 946ml - Lorry sizes

|
|
HG510c
|

|

|
One treatment cleans Diesel fuel injectors and restores lost performance. Lubricates and cleans the entire fuel system. Increases fuel economy and performance while at the same time reduces smoke & particulate exhaust.
Add 946ml to 437 liters of fuel
|
|
|
£17.99
|
|
Hi-Gear Premium Diesel Fuel Injector Cleaner and Cetane Boost 945ml 32oz

|
|
HG610c
|

|

|
Hi-gear Diesel injector cleaner with Cetane boost is specially formulated to keep your rig running strong.
Increased mileage and cleaner emissions.
Pour in your tank for faster start, increase fuel mileage and cleaner emission
Increase Cetane 2 to 6 points depending on fuel
Specially formulated to keep your truck running strong
Increase engine power and fuel mileage
Provides corrosion protection and detergency
Removes varnish and gum buildup on nozzle and pintles
Reduces smoke, exhaust emission and misfires
Improves cold weather start
Lubricates fuel system
Exceeds cummins l-10 specifications.
Add 946ml to 437 liters of fuel
|
|
|
£19.99
|
|
Seal-All — Gas & Oil-Resistant Adhesive
 |
The contact adhesive and sealant that's the mechanic's choice. Seal-all adheres with superior strength to all substrates and materials except paper, cardboard and Styrofoam™. In a class of its own, the "repair-kit-in-a-tube" is ideal for automotive and garage repairs. Available in 2.0 Fl. Oz. carded and 1.0 Fl. Oz. carded packaging. • Practical: Seal-All is resistant to gasoline, oil, paint thinner, and most solvents. Seal-All is also water resistant immediately upon application. • Thin Formula: Seal-All is a thin adhesive. • Quick Dry: Perfect for all your craft needs. Sets in 2-3 minutes. Fully cures in 2-6 hours. • Waterproof: Use to decorate craft projects in and around water. • Paintable: Paint over for UV-resistance.
Seal-All Uses
• Distributor caps, interior panels, radiators, gaskets, transmission carburetor floats, body and trunk leaks, battery cables and terminals, generators, tools, and much more. • Repair and maintain oil pans, gasoline tanks, oil lines, golf club grips, fletching arrows, fishing rod tips and guides, tents, canoes, boats, outboard motors, fishing lures, woodworking, model kits, glass, china, crockery, leather, metal, porcelain, fiberglass, plastics, ornaments, figurines, linoleum, oilcloth, furniture, knobs and drawers, screens, tile, plumbing, gutters, and much. |
£5.99