Metal Repair Kit - J B Weld and Quiksteel epoxy, Metal tank, Plastic tank and Exhaust repair kits. Strongest in the market

Details:-  81 Illingworth Close, Mitcham, Surrey, CR4 3QF, UK  Tel 020 8648 3866020 8648 3866     (We stock all products)

All items posted by recorded post

Solution Graphics

13 Products - Please scroll down to view
           
Metal
repair
 Metal quick
 repair

 Metal
epoxy

 Mental Tank
Repair Kit

Plastics tank
 repair kit

Exhaust
Repair Kit

 

 
1 J-B WELD  8265-S
  Strong Metal Glue to Glue Metal

J-B WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. J-B WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.

To Bond iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous material.
 7.99  


2 J-B KWIK  8276
  Strong Metal Glue to Glue Metal
Fast Bonding - Set in just 4 minutes

J-B KWIK can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 2 minutes after mixing, sets in just 4 minutes, and cures fully in 4 hours. It's water-proof, petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 300° F. J-B KWIK is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.

No clamping is needed. Only minimal pressure while setting.

To Bond iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous materials.
 7.99  

 

3 Industro Weld -  J-B WELD   8280     " BIG SIZE" 10 oz

 
Strong Metal Glue to Glue Metal

INDUSTRO WELD is J-B WELD in an economical shop-size package containing two 5-oz. tubes. Professionals in many industries use it to fix, bond, or fill -- in the shop, factory, or field. INDUSTRO WELD makes strong, permanent repairs when hot welding isn't possible or practical.
J-B WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. J-B WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.
   
£14.99



4  3M Scotch-Weld Instant Adhesive CA4

 
One drop Instant Adhesive Thin  Clear Glue

One-Part, thin, High- Structural Strength, Fast Setting, Multi-Purpose Cyanoacrylate Adhesive Cures at Room Temperature and dries clear.

It is economical to use because generally only drops of adhesive are needed to develop strong bonds to 

Metals, Plastics Steel, Aluminum, ABS, PVC & Rubber.

Time to Handling Strength 5-40 (seconds)
Viscosity (cps) 150, Temp range 40 - 200 F, 1 oz Bottle.

 6.99  



 

5 WATERWELD 8277

 

WATERWELD will plug or seal practically anything that leaks. It will patch holes and cracks, and mend almost anything that is broken. It is excellent for rebuilding or fabricating parts, and as an all-purpose adhesive for metals, wood, fiberglass, masonry, ceramics, PVC and ABS. Permanently repair holes, gouges, cuts ... even seals rot in fiberglass and wood. Cures under water. Safe for use on lines carrying potable water. We should really call this amazing product "The Miracle Welder," because you can use it to plug holes and make permanent repairs under water and in gas tanks -- while they're still leaking. No exaggeration -- this is the best epoxy putty you can use material.

WATERWELD can be applied under water; surfaces to be repaired do not need to be clean and dry. WATERWELD putty "mushrooms" through and around holes, grabbing the edges to hold securely, then hardening for a permanent seal
 8.99  

6 Quiksteel Epoxy

QuikSteel is an all-purpose, full-strength adhesive that bonds like epoxy and hardens like steel hard in 15 minutes - full cure in 1 hour.

QuikSteel seals where other products can not - under and in water, in chemicals, and even in a liquid while a leak is occurring. It is safe, fast, long lasting, chemical and heat resistant.

QuikSteel can rebuild, reshape and repair almost any surface in your house and car, including all metal, wood, glass, ceramic, fiberglass, most plastics and masonry - even concrete. In fact, we can't think of a surface that QuikSteel won't work on.

One square inch of QuikSteel can lift three cars

 

 

500º temperature resistant
Bond holds to -90º F

 

 

 

 

Instruction
Cut off the required amount of QuikSteel.
Knead the putty thoroughly until it is an even colour
Apply firmly to the repair object

£7.99

7 Quiksteel Plastic Epoxy - White

   

Dries white

Mixes like putty, bonds like epoxy, hardens like steel.
266°C temperature resistant.
3 year shelf life.
Sets up underwater.
Impervious to chemicals.
Bond holds to -67°C.
Permanently bonds to: Copper, Steel, PVC, Fibreglass, Plastics, Glass, Ceramics, Wood etc.
Can be drilled, tapped, filed, machined, sanded and painted

Instruction
Cut off the required amount of QuikSteel.
Knead the putty thoroughly until it is an even colour
Apply firmly to the repair object

£7.99

 

 8 J-B Stik  8267-S

 

 

J-B Stik Weld is a hand kneadable, steel-reinforced epoxy putty adhesive/sealant that will plug holes and make permanent repairs on wet and dry surfaces. It will even cure completely submerged in water or GASOLINE! Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply. J-B Stik will fully cure 20-30 minutes; and can be drilled, sanded, filed, tapped, machined, and painted. J-B Stik requires no tools or "prep time", and makes no mess. Use J-B STIK as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Clean surface to be bonded. Apply J-B STIK, and let it cure. That's all there is to it!

It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. J-B STIK is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water

 

What does it bond to

Virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous material.

7.99  


  9 Quiksteel Metal Tank Repair Kit
   

This repair kit contains everything needed to make permanent repairs to leaks in metal tanks or housings - from small pinhole to a large hole or crack. Famous QuikSteel Steel Reinforced Epoxy Putty is impervious to petrol, diesel fuel, oil, automotive fluids, water, coolant and solvents. FAST, EASY, PERMANENT REPAIR - no need to empty or remove tank.

IDEAL TO REPAIR

Gasoline tanks on car, pickup, motorcycle, truck, boat, and RV, as well as portable tanks, (petrol or diesel).

Radiators,  Oil pans, water tanks.

Safe for drinking water




 

 



£8.99


10 Quiksteel Plastic Tank Repair Kit






 
This repair kit contains everything needed to make permanent repairs to leaks in plastic tanks or housings - from small pinhole to a large hole or crack. Famous QuikSteel Plastic Repair Epoxy Putty is impervious to petrol, diesel fuel, oil, automotive fluids, water, coolant and solvents. FAST, EASY, PERMANENT REPAIR - no need to empty or remove tank.

DEAL TO REPAIR

Gasoline tanks on car, pickup, motorcycle, truck, boat, and RV, as well as portable tanks, (petrol or diesel).

Radiators,  Oil pans, water tanks.

Safe for drinking water

 

 




£9.99

11 Quiksteel Thermosteel Exhaust Repair kit
   

ThermoSteel EXHAUST SYSTEM REPAIR KIT is a 2400ºF COLD WELD PASTE and is the number one recognized brand name of high heat cold-weld in the world. Gets stronger with heat. No need to remove exhaust manifold.This kit is ideal for the repair of cracks/holes in

Exhaust manifolds
Catalytic converters
Mufflers
Exhaust pipes and Exhaust Manifolds
Tail Pipes
Boilers
Stoves
Barbecues



 

 

£9.50

 

12 MarineWeld  8272

  Formulated like our industrial-strength J-B WELD cold-weld, MARINE WELD cures as strong as steel, and is water- and weather-proof. It's impervious to saltwater, chemicals, oil, acids, and other corrosive materials, acid-resistant; resists shock, vibration and tolerates extreme temperature fluctuations and withstands temperatures up to 500° F. Every boat afloat should carry MARINE WELD for quick and permanent repairs from surf board nicks to hull repairs.
MARINE WELD is super strong, non-toxic, and safe to use.
Properties (psi) , Tensile Strength: 3960, Adhesion: 1800, Flex Strength: 7320, Tensile Lap Shear: 1040, Shrinkage: 0.0% ,Resistant to: 500° F
Like metal, MARINE WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 2 minutes after mixing, sets in just 4 minutes, and cures fully in 4 hours.

Bond toVirtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous material.

MARINE WELD  £6.99


13 PC-7 Epoxy     Size  .5lb

Bonds Most Everything to Nearly Anything!

 

PC-7 is the tough job epoxy This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7®formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes. High "wet grab" or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.

Size  .5lb

£11.99

 

 

14 PC-7 Epoxy     Size  .5lb

Paste Epoxy That Cures Wet, Dry & Even UNDERWATER

 

Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.

Size  .5lb

£12.99 

PC-11® was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11® formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High "wet grab" or tack of PC-11® makes overhead and sidewall work easy without drip or sag. PC-11® demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
***Note: PC-11® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

Directions:
Using separate knives to remove amount needed, mix equal parts A (white) and B (pale blue) on a flat clean surface until uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, ect. Denatured alcohol can be used to prep the surface. For best results, rough up the surface PC-11® will be bonding to. Normally, no vice or clamp needed. Prop or tape heavy objects to a wall or ceiling.

Apply PC-11® in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample PC-11® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps.

After cure: Paint Drill, Machine, Sand, File, Tap, or Saw.

 

15 Pool Paste

 

Colour: White (16 oz. Set)

Typical Applications:

  • Fix hairline cracks
  • Reset tiles on hot tubs, spas, pools
  • Repair cracked skimmers, baskets
  • Replace non-skid strips
  • Repair broken or cracked vacuum brushes or accessories
  • 15 minute working time
  • High-strength epoxy paste
  • Does not run…Stays where you put it
  • Paint can be applied after light sanding

 

POOL PASTE particularly for setting tiles on hot tubs, spas and pools, with the added benefit of setting quicklywhen time is a factor.It can be used to repair hairline cracks in plastic pipe, concrete, fiberglass and wood and to repair saunas or whirlpools. It is also specially formulated for adhesion to plastics. Easily mixed, 1-to-1, it bonds glass, wood,
steel, iron and ceramics.
EPOXYBOND POOL PASTE can be painted after light sanding.
Working Life (min.)15-35
Setting Time 12hr

£15.99

16 DRYLOK Fast Plug Hydraulic Cement 1.5


DRYLOK Fast Plug is ideal for patching leaks in masonry wall joints and settlement cracks. This hydraulic cement sets quickly in 3 - 5 minutes to effectively stop the flow of up to 3,050 lb. of water. Stops active water, even under pressure. It also anchors metal to masonry.

DRYLOK" FAST PLUG HYDRAULIC CEMENTCement that stops the flow of water through cracks and holes Mix with water,Use to patch mortar joints, cracks, and holes in masonry.
10.99

Cement that stops the flow of water through cracks and holes
Mix with water, sets in 5 minutes
Use to patch mortar joints, cracks, and holes in masonry
Can be used as an anchoring cement to fix bolts, or hooks
1.5 Lbs.

£10.99
 

 

 

17 PC-Crete

Bonds to Concrete Bricks and Mortar

 

PC-Crete is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Crete™ is formulated with real aggregate to look and feel like concrete. Cut, mix and apply. PC-Crete allows a working time of about 3 minutes and cures for service in 60 minutes.
Hand kneadable putty
For concrete steps, brick, mortar, stucco, curbs, pipe and conduit holes and also for lawn ornaments & statues
Mixes in about 1 min. and cures in 60 min.

Size  2oz

£8.99

 

18 PC Concrete Epoxy Gel

Exceptional Strength! Maximum Reliability! High-Heat Deflection!

 

PC Concrete™ epoxy gel is an anchoring and concrete repair product. PC Concrete™ is formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block, and unreinforced masonry. PC Concrete™ has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134°F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments.

Size  1.4 oz

£8.99

 PC Concrete™ is excellent for filling and repair cracks in concrete. PC Concrete™ out performs all caulks and hydraulic cement. PC Concrete™ will not come loose from any cleaned concrete surface. PC Concrete™ will hold during expansion and contraction of concrete. PC Concrete™ the best solution for permanent concrete repair.

PC Concrete™ is a two component (1:1 ratio), 100% solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete™ has a long working time (20 minutes at 75°F.), while providing a bolt down/paint time in as little as 4 hours.

PC-Concrete™ has been tested in accordance with the ICC-AC58 Acceptance Criteria for Adhesive Anchors in Concrete and Masonry Elements. PC-Concrete™ is recognized for the following uses: Static Loads, Seismic / Wind Loading, Long Term Creep at Elevated Temperatures, Static Loading at Elevated Temperatures, Damp Holes, Freeze Thaw Conditions, Critical and Minimum Edge and Spacing Distances.

Job site preparation and work flow - to achieve the desired results, carefully follow these procedures!

**Always be sure the hole/crack is prepared in advance before starting a new cartridge. If at all possible, schedule dispensing to consume an entire cartridge at one time with no interruption of epoxy flow.

To achieve maximum flow and reduce fatigue, break off the nozzle to the largest diameter that will fit into the hole/crack or screen. If the hole is 5/8" diameter or larger, snap off the smaller diameter section before using.

Most nozzles snap off to accommodate varying hole diameters and depths.

After cure: Paint, Drill, Machine, Sand, File, Tap, or Saw.

 

 

  

 

 

 

19   3M Marine Adhesive sealant 5200 fast Cure

A fast curing, one-part polyurethane that chemically reacts with moisture to deliver strong, flexible bonds with excellent adhesion to wood and fiberglass. Forms watertight, weather-resistant seals on joints and boat hardware above and below the waterline. In addition, its flexibility allows for dissipation of stress caused by shock, vibration, swelling or shrinking.

Adhesive to Wood, Metal, Steel, Stainless Steel, Aluminum, Brass, Bronze,
Copper, Lead, Zinc, Fiberglass, Gelcoat, Polycarbonate, Acrylic, Nylon, ABS, Polypropylene
 

 
Strong Metal Glue to Glue Metal

Flexible polyurethane
One part moisture cure
Non-shrinking, non-sagging
Above or below waterline
Fast Formula
Tack free within 2 hrs. and completely cures within 24 hrs
Service Temperature - °F -40°F (-40°C) to 190°F (88°C)
3 oz. tube
 15.99  
3MMarine Adhesive Sealant 5200 Fast Cure White- The seal is extremely strong, retains its strength above or below the water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water.

Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line. Centre board trunk joints. Between struts and planking. Stern joints.

Applications
Typical bonding and sealing applications include:
- Fiberglass deck to fiberglass hull
- Wood to fiberglass
- Portholes
- Deck fittings
- Moldings
- Trunk joints
- Between struts and planking
- Stern joints and hull planking
Structural bonding and sealing of:
- Wood
- Fiberglass
- Gelcoat
- Primed metal
Sealing of:
- Some plastics (test before assembly)
- Glass
- Metals

 

 

 

 

20 EXHAUST MUFFLER & TAIL PIPE REPAIR KIT

 
Do it yourself instant repair kit includes:
2" x 60" bandage, 2" x 24" metal heat shield,
Wire fastener and instructions
Bonds with heat from exhaust system
Heat wrap up to 1200 degrees
Contains no harmful asbestos
   

£6.99

               

21 Unibond Repair Patch    Small & Medium

 

 

 

75 X 150 mm

 

£9.99   75x 150 mm              

 


22 Large

Rapid Repair Large Patch
(300mm x 225mm)
Similar size to a paper A4

£16.99   300mm x 225 mm               



 

 

 

Easy Patch provides a quick, easy and effective solution to all your maintenance and repair problems. There is no sealing, mixing or brushing needed, simply peel off the backing paper and press it firmly on to the damaged surface. Easy Patch will bond to almost any clean dry surface such as wood, metal, fiberglass, concrete, glass and most plastics.

Easy Patch is soft and pliable and will mould to virtually any shape. It cures on exposure to UV Light (Daylight) and the typical cure times range from 10 minutes to one hour depending on the intensity of the UV exposure.

Once the product has hardened, it provides a permanent repair as it is heat resistant, tough, and waterproof and can be drilled, sanded and painted if required.

  

23 DuraPower Product's Patch Kit

   

DuraPower Product's Patch Kit is a Two-Part epoxy Fiberglass Repair Kit

The Patch Kit is especially designed for flat surfaces, such as tanks, containers, boat hulls, or large diameter pipes. This Special patch is easy to use...no measuring, no mess, and no external clean-up. Just blend the components together in the package and apply to any clean surface...It will cure in approximately 20 minutes- even on wet surfaces.

Key BenefitsDoes not required sun to cure, pre-measured two part epoxy , easy to use no external clean-up, f lat surface repair & pipes


SIZES AVAILABLE:

4" X 12" £9.99
Patch Kit - 4" X 12" £9.99

  

24 QuikSteel Aluminum Reinforced Epoxy Putty

   
  • Withstands up to 500° F / 260° C temperatures

  • Sets in 4 to 5 minutes, is steel hard in 15 minutes and cures in 1 hour

  • Cures under water

  • Can be drilled, tapped, filed, sanded and painted

  • Available in steel-reinforced plastic, aluminum and copper formulas

  • Bonds to all metals, fiberglass, plastics, glass, wood, ceramics, brick - almost anything except rubber

  • NSF approved DRINKING WATER SAFE

   

£6.99

 

25 QuikSteel Copper Reinforced Epoxy Putty

 
 
  • Withstands up to 500° F / 260° C temperatures
  • Sets in 4 to 5 minutes, is steel hard in 15 minutes and cures in 1 hour
  • Cures under water
  • Can be drilled, tapped, filed, sanded and painted
  • Available in steel-reinforced plastic, aluminum and copper formulas
  • Bonds to all metals, fiberglass, plastics, glass, wood, ceramics, brick - almost anything except rubber
  • NSF approved DRINKING WATER SAFE
   

£6.99

 


26 ThermoSteel High Heat Repair Filler

 
Repair furnaces, Barbecues, Cooker, Boiler, stoves, Furnaces, Exhaust or any high heat Iron, Steel and Metal items
  • Withstands temperatures to 2400° F / 1316° C
  • Withstands direct flame
  • Fills cracks, holes and pits
  • Strength increases with heat

 


£7.99

 

27 Rustins Quick Dry Radiator Enamel White Paint 250ml
 
For use on All Central Heating Hot Water Radiators
Touch dry in 30 minutes.
Heat resistant, low odour.
Stays white, does not yellow with age.
Not to be used on oil filled electric radiators.
Colours:- Available in White Gloss and White Satin
Size: 250ml
 

Colour
In stock, Allow 1-3 working days for delivery
£5.99                Colours ;- White Gloss,  White Statin

 

28 ALUMINUM & STAINLESS STEEL REPAIR KIT

 

High-performance aluminium-filled epoxy repairs castings, gasket rails, manifolds and other aluminium fixtures plus all types of stainless steel surfaces. Matches original colour, expands and contracts at the same rate.

The Aluminum & Stainless Steel Repair Kit is packaged in a complete kit for easy-tp-use aluminum and stainless steel repairs of non-critical surfaces. Kit contains epoxy pouch, sandpaper, application brush and screen. WORKS BEST ON: Aluminum and stainless steel on auto, home, boat, farm equipment. Uses: Gasket Rails, Intake Manifolds, Truck Tanks, Aluminum Molds. Can be sanded and painted once fully cured. DO NOT USE ON AREAS THAT WILL COME IN CONTACT WITH FOOD RELATED ITEMS. PRODUCT FEATURES: Tensile Strength: 2,150 psi Color: Silver Water Resistant Flammable Do Not Use Near Heat, Sparks or Open Flame Working Time 10 15 Minutes Full Bond: 2 4 Hours at room temperature NOTE: Colder temperatures slows the curing time. Heat may be applied to speed up cure time. Temperature: -60ºF to +175ºF Storage: Store in a cool, dry environment. SURFACE PREPARATION: Slightly roughen repair area(s) with sand paper included in kit. Thoroughly clean repair area(s), remove all dirt, grease, oils and etc.

 


£6.70

 

 

29 Plast-aid Acrylic and PVC  Multi Purpose Repair Kit

 
 

Size 1.5oz £10.99


   In stock, Allow 1-3 working days for delivery

Size 6oz £16.99


   In stock, Allow 1-3 working days for delivery

Plast-aid®, the exciting new multi-purpose repair plastic used for thousands of repair solutions! Unlike anything on the market today, Plast-aid® forms a hard, durable, waterproof plastic in only
Plast-aid® is a two part compound consisting of a liquid and powder. When combined, Plast-aid®'s unique curing process begins. As it thickens, Plast-aid® transforms from a castable liquid, to a glue, to a putty, to a clay, and finally to a hard, durable, waterproof plastic. This progression makes Plast-aid® an incredibly versatile tool allowing it to be cast into molds, used to repair breaks and fill gaps, formed into shapes for custom parts, and much, much more!
Colour Plast-aid® with artist acrylic or wood stain.
After Plast-aid® cures, drill, cut, file & polish your custom parts

For Car
From fixing cracked panels & fenders, to stripped knobs, to broken light lenses

Pool and Spa

Repair pools & spas, hot tub, skimmers, holes, cracks, leaky PVC, ABS, Acrylic, etc.

Plast-aid® repairs are fast, waterproof & permanent

Plumbling
Unsurpassed for PVC plumbing repair! Don't cut out damaged PVC, simply & permanently patch it with Plast-aid® in only 15 minutes!
Make custom fittings & threaded adaptors

Home
Fix everything from dropped cell phones, remote controls & hair dryers to stripped out hinges, broken toys, computer housings & refrigerator shelves
Repair broken items and create custom parts with one product!
Use Silly® Putty to make molds of ornate knobs, Cast the molds with colour Plast-aid®. Fill cracks.
Use on model planes, trains & boats
 

 

 

30 Seal-All - Gas & Oil-Resistant Adhesive

The contact adhesive and sealant that's the mechanic's choice. Seal-all adheres with superior strength to all substrates and materials except paper, cardboard and Styrofoam™. In a class of its own, the "repair-kit-in-a-tube" is ideal for automotive and garage repairs. Available in 2.0 Fl. Oz. carded  packaging.

 

Seal-All Uses

 • Distributor caps, interior panels, radiators, gaskets, transmission carburetor floats, body and trunk leaks, battery cables and terminals, generators, tools, and much more.

 

• Repair and maintain oil pans, gasoline tanks, oil lines, golf club grips, fletching arrows, fishing rod tips and guides, tents, canoes, boats, outboard motors, fishing lures, woodworking, model kits, glass, china, crockery, leather, metal, porcelain, fiberglass, plastics, ornaments, figurines, linoleum, oilcloth, furniture, knobs and drawers, screens, tile, plumbing, gutters, and much



 
 Practical: Seal-All is resistant to gasoline, oil, paint thinner, and most solvents.Seal-All is also water resistant immediately upon application.

• Thin Formula: Seal-All is a thin adhesive.

• Quick Dry: Perfect for all your craft needs. Sets in 2-3 minutes. Fully cures in 2-6 hours.

• Waterproof: Use to decorate craft projects in and around water.

• Paintable: Paint over for UV-resistance.

 £7.99


31  Permatex  Flowable Silicone Windshield and Glass Sealer 1.5oz

  In stock, Allow 1-3 working days for delivery

£7.99


For Windshields, sunroofs, windows, headlamp assemblies, marine glass, RV vents and windowstic, vinyl, rubber, steel, etc.

Permatex Flowable Silicone Windshield and Glass Sealer flows into hidden and hard-to-reach areas while its wicking action silicone 'seeks the leak.' It forms a tough, waterproof, durable, clear seal that is resistant to weather, extreme temperatures, vibration, shock and most shop chemicals. Temperature range -80 degree farenheit to 450 degree farenheit (-62°C to 232°C). This sealer comes from a trusted line of Permatex sealants for virtually any automotive sealing application, from windshields to vinyl tops to electrical connections. These well-known general-purpose and job specific sealants are cornerstones in the Permatex line.


• Fills surface voids and irregularities
• Forms a tough, waterproof, durable, clear seal
• Resistant to weather, extreme temperatures, vibration, shock and most shop chemicals
• Suggested Applications: Windshields, sunroofs, windows, headlamp assemblies, marine glass, RV vents and windowstic, vinyl, rubber, steel, etc
 

 

32 Permatex RTV Clear Silicone Adhesive

 


"PERMATEX" RTV SILICONE ADHESIVE

3 oz.
All purpose clear sealant.
Waterproof & flexible.
Weather resistant.
Seals & insulates
General-purpose, clear RTV indoor/outdoor sealant
Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops
Protects and repairs electrical wiring
May be applied to horizontal or vertical surfaces
Waterproof and flexible
Temperature range -75°F to 400°F (-59°C to 204°C); resists oil, water, weather, vibration, grease
Carded.
Suggested Applications: Windshields, door frames, electrical connections, vinyl tops, seams and roofs.
 8.99  Size 3oz

 

 

 

33 Gorilla Glue  - for wood and others

 
 

115ml Bottle £5.99
275ml Bottle £8.99

 

Gorilla Glue bonds materials other adhesives simply can't. Gorilla Glue bonds wood, metal, stone, ceramics, foam, glass and much more! And it's still the best glue for anyone who wants the job done right. Plus, it's now available in a faster setting formula and a Precision Glue Pen for pin point applications.

Benefits of the new improved Gorilla Glue family:

VERSATILE : ideal for most household fixes, building repairs and creative projects inside and out. Bonds wood, stone, metal, ceramics, foam, glass, brick, concrete and more...

100% WATERPROOF : does not break down when exposed to outdoor elements. Easily passes ANSI/HPVA HP-1-2000 Types 1 and 2.

TEMPERATURE RESISTANT : once its dry Gorilla Glue is unaffected by extreme heat or cold.

SANDABLE, PAINTABLE, STAINABLE : the invisible glue line makes finishing easy.

MORE COVERAGE - Because Gorilla Glue foams to 3X its size, a little goes a long way (30ml/m squared

Gorilla Glue 115ml Bottle £5.99            In stock, Allow 1-3 working days for delivery

Gorilla Glue 275ml  Bottle  £8.99            
In stock, Allow 1-3 working days for delivery


34  Polyethylene and Polypropylene Adhesive Glue

3M Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693H

 Colour -Clear    Size -5 0z Tube

   
  £16.99
 

This adhesive is unique in its ability to bond hard-to-hold materials like polypropylene, polyethylene, and high-impact polystyrene.

3M Scotch-Weld High Performance Industrial Plastic Adhesive 4693H is a clear, elastomeric adhesive with exceptional adhesion to metal and plastic. It has immediate bond strength as well as long tack range and contact bond properties. Exhibits outstanding bond strength to metals and many plastics. Good resistance to water and aging.

 

Feature

• 3M™ Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693: low viscosity grade for spray or brush application.

• 3M™ Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693H: high viscosity grade in collapsible tubes for flow applications.

• Clear, elastomeric adhesives with high immediate bond strength, long tack range and contact bond properties.

• Exhibit outstanding bond strength to many metals and many plastics such as ABS, glass filled polyester, polypropylene, linear polyethylene and hi-impact styrene.

• Dries to a tough, flexible and transparent film with good resistance to water and aging.

Note: Not recommended for use on plasticized vinyl. Use on plasticized vinyl may result in poor adhesion or bonds that deteriorate over time.

 

Non-Porous Surface: Brush, spray or flow an even coat of adhesive to both surfaces. To achieve a satisfactory bond, adhesive must be force dried @ 180°F (82°C). Bond with firm pressure while warm.

Drying Time: Drying time depends on temperature, humidity, air movement and porosity of the materials bonded. When brushing, wait a minimum of 10 minutes.

Bonds can be made up to 60 minutes. Sprayed bonds may be made almost immediately and up to 60 minutes.

Heat Reactivation: Adhesive may be heat reactivated by raising the glue linetemperature to 180°F (82°C).

Cleanup: Excess adhesive may be removed with a solvent such as 3M™

 



 

35 PLASTEX 3000 Adhesive - Polyethylene, Polypropylene and Polyolefin Adhesive

 

£29.99                    35ML TUBE NATURAL WITH CAULKING GUN ADAPTER & 2 MIXING NOZZLES

PLASTEX 3000 Adhesive bonds soft plastic, most polyethylene, polypropylene, HDPE, UHMW and polyolefin materials without heat or special surface treatments. PLASTEX 3000 can also bond dissimilar materials including metals, plastic to metals, wood, glass or any structural repairs that require high strength. PLASTEX 3000 is also compatible with other PLASTEX products. PLASTEX 3000 is great for flexible ATV or dirt bike fuel tanks, fenders or any other flexible materials that until now have been impossible to repair. PLASTEX 3000 is available in 35ml tubes and two colours natural (cream colour) and black.

DIRECTIONS FOR USE: Place PLASTEX 3000 cartridge into the PLASTEX applicator gun or caulking gun adapter. Remove cap. Disperse small amount to insure complete mixing. Use only 10:1 PLASTEX mixing tips. If mixing without auto mixing tips be sure to thoroughly mix both parts together for at least 30 seconds. Apply adhesive to clean surfaces within the 3 minute work life. Secure parts with adhesive tape or clamps for 1-2 hours. Allow 12 to 14 hours for full cure at 70f (22c).

For a smooth finish place packaging tape over product

 

36  RapidFix Instant Dual Adhesive

 


 For high heat and inside Car Automobile

£19.99

 

Can bond most materials instantly, including:

Rubber, Glass,  Copper,  Aluminium, Metal,  Steel, Timber, Ceramics  Most Plastics

What is RapidFix?
Rapid Fix Adhesive Delivers A High Strength Bond In Seconds
Rapid Fix Adhesive Will Not dry Out In Seconds
Rapid Fix Adhesive Fix Dries Clear
 

Can bond most materials instantly, including:
Rubber, Glass, Copper, Aluminium, Metal, Steel, Timber, Ceramics Most Plastics

RapidFix adhesive is an advanced polymer that can quickly - sometimes instantly - bond most materials to themselves or another material. The RapidFix glue is a combination of an instant adhesive plus a welding powder that is an incredible tool for repairing almost anything

Rapid fix is the must have glue for the workshop and home,
Creates ultra strong bonds with the tiniest drop of adhesive
It bonds in second so there is no long waiting time and is ultra strong
Rapid fix can be used on its own as a glue or can be used in conjunction with its own welding powder

The RapidFix welding powder is a complementary formulation that enables even stronger bonds, and can repair holes, cracks, and gaps. For some applications, the welding powder can even function like solder or traditional heat welding.

Areas treated with RapidFix adhesive can be filed, sanded, and painted almost immediately.
These images show how RapidFix can even repair a porous aluminum casting on a car's water pump that has suffered a broken mount.
The repair is simple:
1) Saturate one side of the break with RapidFix
2) Press the parts together and hold for a few moments
3) Saturate the seam with RapidFix a second time
4) Immediately add the welding powder
5) Repeat steps #3-#4 around the joint
6) Wipe off the excess welding powder

You're done!
 

 

     


36 Amazing GOOP® Craft Adhesive

 
Amazing GOOP® Craft Adhesive
Now you can design and create with a wide range of materials, including metal, stones and jewels.
•Strongest single component adhesive.
•Bonds to wood, metal, cement, fabric, leather.
•Create works of art of professional quality.
•Seals against water for rain and swimwear.
•Safe for repeated washing and drying.
•Withstands heat up to 150 °F / 66 °C.

Uses:
•Attach decals and buttons to clothing.
•Affix stones and gems to fashion jewelry.
•Assemble plastic and wood craft kits.
•Repair fabric and costumes.
•Fix cracks in ceramic bowls and pottery.
•Create weatherproof garden decorations.
•And much more!
 

Amazing GOOP® Craft Adhesive3.7fl.oz. (110ml) 6.99