Crystal Bond is a very special glass rapid curing adhesive that bonds glass
to glass and glass to metal in seconds using natural sunlight to cure and form a
permanent bond. Crystal Bond will cure optically clear giving an invisible
joint. Repair glass ornaments & crystal with no trace of cracks or glue left behind.
You will only see the two surfaces of the materials bonded together, any
surplus adhesive can be easily cleaned off with regular glass cleaner and paper
towels. Strong clear and easy to use, Crystal Bond has an exclusive formula that
bonds in seconds and eliminates the need for costly and potentially harmful UV
lights. Industries that rely on UV curing can wave goodbye to costs, fuss and
the health and safety concerns.
Crystal Bond's revolutionary "safe light system"
means that once the bonds are applied, they cure on demand using white and blue
light at 470nm. There is no need for UV bulbs that damage eyes and skin.
Crystal Bond is ideal for bonding:
Glass to glass, metal, plastics or Ceramics
Fiber optics
Lens bonding
Jewelry
Furniture Construction
Glass Ornaments
2 E-6000® Self-Leveling Formula !!! Industrial strength !!!
E-6000® Self-Leveling Formula
Glass and Rubber Cement, Hardwood, Wood, Metals, Tile, Aluminum, Fabric Copper, Marble, Leather, Neoprene, Vinyl Most Plastics, Polycarbonate, Ceramic, Brick, Fiberglass, Linoleum, Waterproof Cloth, ABS, PVC, Brass And Many More
An indispensable maintenance tool, E-6000 allows the kind of permanent repair and maintenance of equipment that may have been too expensive or difficult in the past. Its strength in adhering metals, glass, rubber and plastics.
E-6000 is the jeweler's glue of choice, and our favorite. It is a one-part epoxy, (meaning you don't have to mix anything to make the glue -- it just comes out of a tube).
Perfect for attaching findings to base metal and costume jewelry pieces. E-6000 is safe for use with virtually every type of gemstone and works on wood, leather, vinyl, and canvas.
Non-corrosive and self-leveling, E-6000 adheres in 5 to 10 minutes, and hardens to a clear, waterproof cure in 24 hours.
This means you have about 10 minutes to position and reposition whatever you are gluing. If you are making jewelry, you should let the piece dry "hard" overnight, before you wear it. We advise against using superglue for most jewelry-making projects. Superglue discolors stones. Superglue dries like glass, so its seal shatters like glass when piece is dropped. E6000 dries like rubber, so its seal acts like a shock absorber when a piece is dropped.
Use in applications that are exposed tosun and ultra-violet light
Clear UV-6800 maintains all of the superior properties of E-6000 and enhances it with UV stabilizers, which provide ultraviolet resistance for marine and outdoor applications. UV-6800 may be used as an adhesive on fiberglass, concrete, metal, glass and wood, including teak. UV-6800 is an excellent insulator against water, corrosion from salt spray, mildew, bacteria, most chemicals and vibration. UV-6800 maintains its adhesive strength even when submerged under water. For complete UV resistance, paint over UV-6800.
£7.50
4Opti-tec 5013Clear Glass Adhesive -To Glue Glass Tables to Metal (Heavy duty)
Full Kit £34.99
Opti-Tec 5013 Full kit £34.99 Refill 50 gram cartridge of epoxy for Opti Tec 5013 £16.99
Opti-tec 5013 is a two component, medium viscosity epoxy with high optical clarity. It has a fast room temperature cure, which can be accelerated by heating. Opti-tec 5013 is designed for potting, encapsulation and adhesion of components where high optical clarity, good wetting and medium viscosity are important.
Opti-tec 5013 can be used for bonding glass, quartz, metal and many plastics. It finds uses in assembly and repair of glass items where a clear adhesive is required.
Applications
• Optical assembly, optical filters, lenses, prisms
• Glass bonding
• Opto-electronics, photonics, LEDs
• Optical encapsulation & glob topping, casting, potting
• Repair of glass, wood, ceramic, metal
• Repair or restoration of minerals, gems and quartz crystals
Features
• OPT 5013 is an optically clear adhesive with a viscosity of 5,000-10,000 cps.
• OPT 5013 sets within minutes and cures within hours at room temperature. It reaches handling strength in 30 minutes. Full cure can be achieved in 10 minutes at 65°C.
• OPT 5013 has high surface energy. This allows it to wet and wick between surfaces. It develops strong adhesion to most materials used in optics, including metals, ceramics, glass and most plastics.
• OPT 5013 has good impact and thermal shock resistance.
• OPT 5013 is a hard material after cure and can be polished.
• OPT 5013 has excellent resistance to yellowing.
• OPT 5013 is supplied in convenient side-by-side double syringe cartridges, complete with static mixing nozzles.
Contains 50 convenient side-by-side double syringe gram cartridge of epoxy, a Syringe Gun and three static mixing nozzles
Cure schedule
Bondline temperature
Time
23°C
2 hours
65°C
10 mins
5 Optical Clear Epoxy Adhesive.
Hard Glass Filler that can be can be polished.
To fill chip glass and bond glass and marble etc.
£16.99
Optical Clear Epoxy Adhesive. Hard Glass Filler that can be can be polished.
To fill chip glass and bond glass and marble etc
Opti-tec 5001 is a two component, very low viscosity epoxy with very high optical clarity. It has a long pot life and can be cured at room temperature or at 65°C for 1 hour. Opti-tec 5001 is designed for potting, encapsulation and adhesion of components where high optical clarity, good wetting and low viscosity are important. Temperature range -60 to 200°C
Applications
Optical assembly, optical filters
Glass bonding
Plastic fibre optics
Opto-electronics, photonics
Potting or encapsulation where high optical clarity is required: thin rock sections, geology samples, relics and artifacts, tissue samples
Features
OPT 5001 is a clear, water white adhesive with a viscosity of 100 cps.
OPT 5001 has a one hour pot life after mixing and cures within 16-24 hours at room temperature. Cure can be achieved in 60 minutes at 65°C.
OPT 5001 has high surface energy. This and its low viscosity allows it to readily wet and wick between surfaces. It develops strong adhesion to most materials used in optics, including metals, ceramics, glass and most plastics.
OPT 5001 has good impact and thermal shock resistance, with low internal stresses due to low shrinkage on cure.
OPT 5001 is a hard, glass-like material after cure and can be polished.
OPT 5001 has good chemical and moisture resistance.
OPT 5001 has excellent resistance to yellowing.
OPT 5001 features low fluorescence.
Packaging
The twinpack is a clear film sachet, with the resin and hardener separated by a removable clip and rail divider. To mix the adhesive, remove the divider and mix the two parts together within the twinpack. The two parts are mixed until they appear uniform, which usually takes about 1 to 2 minutes. Cut off one corner of the twinpack, and dispense to required area, or to syringe for more precise application.
Standard twinpack size is 4g total weight. OPT 5001 twinpack sachets are packaged in quantities of 5, sealed into a protective aluminium foil pouch. After opening pouch, use adhesive twinpacks within a few days, or tightly reseal the pouch with the enclosed desiccant to preserve shelf-life.
6 Silcpset 158 - High Heat and Oven Glass Door Glue
Use in applications that are exposed high heat up to 300°C
1 Part high temperature adhesive sealant glue for
Sealing Glass Back onto Domestic/Commercial Oven Doors
For glass metal, plastic ceramic etc
Flexible from -60 to + 300°C
Good electrical insulation
Sealing of heating installations
Gaskets in pumps and motors
Excellent bonding to a wide range of substrates, which are exposed to high temperatures
Resistance to chemicals and solvents
Excellent bonding to a wide range of substrates
Silcoset 158 is a ready-to-use adhesive sealant, which reacts with atmospheric moisture to form a resilient rubber, which remains flexible over a very wide temperature range.
£8.50
2 Devcon 5 Minutes Clear Epoxy
• 2 - 1.5oz tubes
• High strength bond
• 1500PSI
• Sets up in 5 minutes and dries clear
• Resistant to most chemicals
• All purpose bonding and repairs
• Works best on metals, wood, concrete, ceramic, glass and
Devcon 20645 S-206 High Strength 5 Minute All Purpose Epoxy, Clear Devcon 20645 S-206 High Strength 5 Minute All Purpose Epoxy, Clear Features: All purpose epoxy, works on metal, wood, concrete, glass, ceramics, china and much more Resistant to most chemicals Sets in five minutes Dries clear 1,500 lbs per square inch holding strength. One each tubes of epoxy and hardener.
7.99Devcon 5 Minutes Clear Epoxy in stock, Allow 1-3 working days for delivery
7 Glass Patch
GlassPatch is a strong-as-steel, clear adhesive film that holds broken glass together for safer and more secure classrooms. GlassPatch comes in a roll and needs no tools or special training.
Use GlassPatch for emergency repair of cracked or broken windows, or to reinforce good windows. GlassPatch comes in a roll and is easy to use.
What makes GlassPatch great?
Saves money
Keeps classrooms safe
Applied in seconds
Crystal clear, strong-as-steel
Requires no special skills, tools
Keeps windows fully functional
Keeps weather and insects out
Glass Patch 18" x 90" £19.99
A roll of GlassPatch is like having a few spare windows in your toolbox, always ready to make that window fully functional again. Using GlassPatch is easy and requires no special tools or training. Simply cut GlassPatch to desired size, peel off backing and apply to window. What could be easier?
9 Bison Mirror Adhesive
£7.50
Paste adhesive for bonding traditional mirrors to all kinds of surfaces. Does not attack lacquer. Glue mirror to walls etc.
Field of application
Bison Mirror Adhesive bonds traditional silver mirrors to all kinds of surfaces.
Properties
Temp. resistance: from -50°C up to +145°C.
Resistance to moisture: good.
Frost resistance: good.
Elasticity: permanently flexible.
General: fast setting, fine adjustment of the mirror's position is possible immediately after positioning.
